- 1. Free chlorine
- Add 7.2 oz of dichlor (sodium dichloroisocyanurate) for +2.0 ppm; it also adds 1.8 ppm CYA
- Before swimming
- After this dose, wait until free chlorine falls below 3 ppm: the stricter of the two panels on the EPA Reg. No. 7124-31 label, paraphrased here because this site's scan of it is too garbled to quote word for word.
- 2. Total alkalinity
- Add 67.2 oz (4.20 lb) of baking soda (sodium bicarbonate) for +20.0 ppm
- 3. pH
- Test, then adjust in small doses and retest (the pH and alkalinity calculator explains why there's no dose here)
- 4. Cyanuric acid (outdoor pools)
- Add 36.4 oz (2.28 lb) of cyanuric acid (stabilizer) for +18.2 ppm
- 5. Calcium hardness
- Add 201.9 oz (12.62 lb) of calcium chloride for +70.0 ppm
- Order of addition
- Indiana Department of Health: "(1) Free Available Chlorine, (2) total alkalinity, (3) pH, (4) cyanuric acid – outdoor pools, and (5) total hardness"
- Free chlorine now: 1.0
- Low against at least 2 ppm with CYA (CDC, for home pools)
- pH now: 7.60
- Inside the primary range
- Total alkalinity now: 70.0
- Inside the primary range
- Cyanuric acid now: 20.0
- Inside the primary range
- Calcium hardness now: 180.0
- Low against 200–400 ppm for masonry (MAHC 2024 Annex, guidance for public pools)