Pool Poop and Vomit Accident Checklist: What to Do, Step by Step
Updated
Pool poop and vomit accident checklist
Follow the first two sections for any accident, then the section for what you saw. The contact times come from the MAHC 2024, a public-pool code, and its Annex, guidance for public pools. They are written for public pools, not backyard ones, and are the most specific published times there are.
0 of 29 done
Right away, for any accident
The MAHC 2024, a public-pool code, closes a pool to swimmers immediately after a fecal or vomit accident. That includes any other pool or hot tub that shares the same circulation system.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
That is the removal step in the MAHC 2024, a public-pool code (6.5.2.2).
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC 2024, a public-pool code, says a contaminated net or bucket should be cleaned thoroughly and then disinfected, and gives leaving it immersed during the pool's disinfection as an example.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC Annex, guidance for public pools, explains that the vacuum itself becomes contaminated, and that it knows of no manufacturer's protocol for disinfecting a vacuum after fecal, vomit or blood contamination.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
The MAHC 2024, a public-pool code, sets different chlorine levels and times for each. Diarrhea is the serious case because of Cryptosporidium, the germ chlorine is slowest against.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
Before you raise the chlorine
The MAHC 2024, a public-pool code, makes this the first treatment step (6.5.2.3). CDC adds that chlorine kills germs more slowly as pH rises, especially above 8.0.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC 2024, a public-pool code, asks for this, and its Annex, guidance for public pools, explains that germ inactivation is well documented to slow as the water gets colder.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC 2024, a public-pool code, has the circulation system operate while the pool reaches and keeps its chlorine level.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
CYA slows disinfection. CDC's disinfection times are for water without it and say the times are longer with it.
Source: CDC, Home Pool and Hot Tub Water Treatment and Testing
The MAHC 2024, a public-pool code, requires non-stabilized chlorine for this. Its Annex, guidance for public pools, notes that dichlor or trichlor at these doses would leave a high CYA behind that only fresh water can lower.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC Annex, guidance for public pools, notes that many conventional kits cannot measure up to 20 mg/L and prefers an FAS-DPD titration kit. CDC warns that above 10 ppm a DPD test can bleach out and read falsely low, even 0.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
The MAHC 2024, a public-pool code, asks for testing at multiple sampling points so the level is reached throughout the pool. The Annex, guidance for public pools, notes that its times do not allow for dead spots with poor mixing.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
A formed stool or vomit
This section is for water with no cyanuric acid unless a step says otherwise.
The MAHC 2024, a public-pool code, sets this for a formed stool (6.5.3.1) and for vomit (6.5.3.3), or an equivalent time and concentration with the same CT value.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC 2024, a public-pool code, says the inactivation time starts when the pool reaches the intended level.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
These are the MAHC Annex's times, guidance for public pools, for a 99.9% kill of Giardia at pH 7.5 and 77°F (25°C).
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
The MAHC 2024, a public-pool code, doubles the time for water with stabilizer (6.5.3.1.1). Its Annex, guidance for public pools, says stabilizers slow disinfection, that higher chlorine is likely needed, and that no standard protocol or data exist for it, so its 2 ppm figure is a safety value.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
That is the MAHC 2024 procedure, a public-pool code, for a brominated pool (6.5.3.5).
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
Diarrhea
Cryptosporidium makes diarrhea very different. CDC says it can survive in properly treated water for more than 7 days, and in water without CYA at 1 ppm free chlorine, pH 7.5 and 77°F (25°C) it needs approximately 15,300 minutes (10.6 days) to be killed.
That is the MAHC 2024's rule, a public-pool code (6.5.3.2). It is a CT value: 15,300 mg min/L, concentration times minutes.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC Annex, guidance for public pools, gives these examples. For water with CYA it allows only the listed levels, since the response to chlorine is not linear there.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
The MAHC 2024, a public-pool code, calls for lowering CYA to 15 ppm or less by draining and refilling if necessary. Its Annex, guidance for public pools, explains that 3-log kill was reached at 16 ppm CYA and not at 50 ppm.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
These are the MAHC 2024's times, a public-pool code (Table 6.5.3.2.1). The same table gives shorter times when the pool started at higher CYA and was partly drained and refilled, such as 20.7 hours at 20 ppm for a pool that began at 90 ppm and had 83% of its water replaced.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
Complete drainage is one of the three options the MAHC 2024, a public-pool code, lists for a pool with CYA.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code
The MAHC Annex, guidance for public pools, says to start timing only when testing shows the level is reached, and prefers FAS-DPD over a colour comparator at these levels.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
Going back in
A pool can look clear and still hold Cryptosporidium. CDC says chlorine kills most germs within minutes, but this one can survive in properly treated water for more than 7 days.
Source: CDC, Guidelines for Keeping Your Pool Safe and Healthy
The MAHC Annex, guidance for public pools, notes that EPA has approved no pool product for use above 4 ppm when swimmers are present. Your label's own limit is on the re-entry chart linked below.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
The MAHC Annex, guidance for public pools, says pH, free chlorine and CYA should be checked and adjusted if necessary before the pool reopens.
Source: CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools
Next time
CDC says one diarrheal incident can release millions of germs that make other swimmers sick if they swallow even a little water.
Source: CDC, Guidelines for Keeping Your Pool Safe and Healthy
Those are CDC's steps to keep germs out of the water.
Source: CDC, Guidelines for Keeping Your Pool Safe and Healthy
CDC's home pool page asks for this, since sweat, urine, feces and dirt use chlorine up.
Source: CDC, Home Pool and Hot Tub Water Treatment and Testing
Sources (4)
- CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code cdc.gov
- CDC, Model Aquatic Health Code, 2024 (5th edition): Annex, guidance for public pools cdc.gov
- CDC, Home Pool and Hot Tub Water Treatment and Testing cdc.gov
- CDC, Guidelines for Keeping Your Pool Safe and Healthy cdc.gov
In short: After a formed stool or vomit, the MAHC 2024, a public-pool code, raises free chlorine to 2.0 ppm for at least 25 minutes; after diarrhea it takes at least 20.0 ppm for at least 12.75 hours, with cyanuric acid first brought to 15 ppm or less. CDC says Cryptosporidium can survive more than 7 days in treated water.
This checklist collects published guidance in one place; it doesn't replace the label on a product, your equipment's manual or your local code. Your ticks are saved in this browser only.
Handling pool chemicals safely
In the words of the public-health agencies:
Chemicals shall be added to water when diluting as opposed to adding water to a concentrated chemical.
(MAHC 2024, 5.9.3.4.2.2 (a public-pool code) (PDF, opens in a new tab))Two or more chemicals shall never be mixed in the same dilution water.
(MAHC 2024, 5.9.3.4.2.3.1 (a public-pool code) (PDF, opens in a new tab))If label directs pre-dissolving, add the pool chemical to water. NEVER add water to the pool chemical because a violent (potentially explosive) reaction can occur.
(CDC, Use Pool Chemicals Safely (PDF, opens in a new tab))Store each pool chemical separately in a dedicated location.
(CDC, Pool Chemical Safety (opens in a new tab))Do not mix old chemicals with fresh chemical, even if they are the same type
(EPA 550-F-01-003 (PDF, opens in a new tab))Never mix:
(CDC, Use Pool Chemicals Safely (PDF, opens in a new tab))Chlorine products with acid; this could create toxic gases.
Different pool chemicals (for example, different types of chlorine products) with each other or with any other substance.
Get new tools by email
When we add a tool to Pool Chemical Log, we'll send you one short email. Nothing else.
An accident in the water is a disinfection problem with a clock on it, and the clock depends on what was in the water. This checklist takes a home pool owner through the steps in order: out of the water, remove, prepare the water, raise the chlorine for the right time, and go back in. The levels and times come from the MAHC 2024, a public-pool code, and the Annex that explains it, guidance for public pools, because no home-pool source gives them. They were written for public pools with an operator on duty, so the checklist notes what that means in a backyard. To size a chlorine dose, use the pool shock calculator.
Worked example: three accidents in one pool
Take one pool with a test kit that reads to 20 ppm, and see how the same morning goes three ways.
- A formed stool, no cyanuric acid. Free chlorine tests 1.5 ppm, pH 7.4 and the water is 80°F. The stool is netted out, and the chlorine is raised to 2.0 ppm and held for at least 25 minutes, timed from when the test first reads 2.0. That is the MAHC 2024 figure, a public-pool code.
- The same stool, but the pool has CYA. The code doubles the time, and its Annex, guidance for public pools, notes that no standard protocol exists for stabilized water, so the 2 ppm figure is a safety value.
- Diarrhea, with 50 ppm CYA. Cyanuric acid has to come down first. The code's table has an entry for this: with a pool that started at 50 ppm and had 70% of its water drained and replaced, which brings CYA to about 15 ppm, holding 20 ppm of free chlorine takes 23.2 hours, 30 ppm takes 14.9 hours and 40 ppm takes 7.0 hours. The cyanuric acid calculator sizes the drain.
Why the times are so different
The wait comes from a product, not a rule of thumb: the concentration of free chlorine multiplied by the minutes it is held, called the CT value. The Annex, guidance for public pools, bases a formed stool on Giardia and diarrhea on Cryptosporidium, which needs a CT of 15,300 mg min/L. At 20 mg/L that is 765 minutes, or 12.75 hours. CDC's own table for unstabilized water at 1 ppm free chlorine, pH 7.5 and 77°F reads the same way: about 45 minutes for Giardia and about 15,300 minutes, 10.6 days, for Cryptosporidium. Hepatitis A takes about 16 minutes and E. coli O157:H7 less than 1 minute. That gap is why clear water and a normal chlorine reading are no sign of safety after diarrhea: chlorine that handles most germs within minutes takes days against Cryptosporidium at ordinary levels.
What cyanuric acid does to the clock
CDC states that its disinfection times are only for water without cyanuric acid and are longer with it. The Annex, guidance for public pools, gives the evidence for diarrhea: a 3-log kill of Cryptosporidium was reached at 16 ppm CYA and not at 50 ppm, and at 50 ppm CYA and 20 ppm free chlorine, a 1-log kill took an average of 61.9 hours. So the MAHC 2024, a public-pool code, does not offer a longer hold for a stabilized pool after diarrhea. It requires CYA at 15 ppm or less before the high-chlorine hold starts. For a home pool treated with dichlor or trichlor, that means a partial drain and refill, and what cyanuric acid does explains why the stabilizer builds up in the first place.
Testing, temperature and pH
Three measurements decide whether the clock is valid. The MAHC 2024, a public-pool code, wants pH at 7.5 or lower and the water at 77°F (25°C) or warmer, and it says the free chlorine must be tested in several places. The Annex, guidance for public pools, adds that a conventional kit cannot read up to 20 mg/L, so a titration kit or strips with that range are needed, and that the timing starts only once testing shows the level reached. CDC adds the trap: above 10 ppm a standard DPD test can bleach out and read low or 0.
What changes at home
The MAHC 2024, a public-pool code, gives a second route for diarrhea, running the water through a secondary treatment such as UV or ozone, and that is not something most backyard pools have, so the practical route is a high-chlorine hold or a full drain. The Annex, guidance for public pools, advises using a non-stabilized product, and names unscented household bleach labeled for drinking water disinfection as one option. A dose that large is a chemical hazard of its own, so keep the storage and handling checklist open. The Annex also notes that EPA has approved no pool product use above 4 ppm with swimmers present, so after the hold the chlorine has to fall to the limit on your label before anyone swims. The re-entry chart lists those limits.
When to get help
Call a pool service technician if you cannot test above 10 ppm, if the CYA is high and you are unsure how much water to replace, or if the pool is shared with neighbors or a homeowners' association, where the rules for the shared pool may be stricter. For the next time, CDC's list is short: keep anyone with diarrhea out of the water, shower first, check diapers every hour and change them away from the poolside.