Skip to content
Pool Chemical Log

Pool Test Schedule: How Often to Test Chlorine, pH, Alkalinity, CYA and More

Updated

How often to test: CDC for home pools, and the MAHC 2024, a public-pool code
ReadingHome pools (CDC)Public pools (MAHC 2024, a public-pool code)MAHC section
Free chlorine (or total bromine)At least twice a day, and more often when many people are using the poolBefore opening each day; with a manual feed, also every 2 hours while open; with an automatic feed, every 4 hours while open5.7.5.1, 5.7.5.2 and 5.7.5.3
pHAt least twice a day, and more often when many people are using the poolBefore opening each day; with a manual feed, also every 2 hours while open; with an automatic feed, every 4 hours while open5.7.5.1, 5.7.5.2 and 5.7.5.3
Combined chlorine (chloramines)Not setListed with free chlorine and pH among the readings tested before opening each day5.7.5.1
In-line ORP, if installedNot setRecorded at the same time as the chlorine (or bromine) and pH tests5.7.5.4
Total alkalinityNot setWeekly5.7.5.5
Calcium hardnessNot setMonthly5.7.5.6
Cyanuric acid (CYA)Not setMonthly; 24 hours after CYA is added; weekly or more often when stabilized chlorine is the main disinfectant5.7.5.7, 5.7.5.7.1 and 5.7.5.7.2
Saturation index (LSI)Not setMonthly5.7.5.8
Total dissolved solids (TDS)Not setQuarterly5.7.5.9
Water temperature (heated pools)Not setRecorded at the same time as the chlorine (or bromine) and pH tests5.7.5.10
Salt, with an in-line salt chlorinatorNot setRequired when an in-line electrolytic chlorinator is used; the interval is given in the code itself5.7.5.11

CDC sets a testing frequency for only two readings, chlorine and pH. The MAHC is written for public pools, so its other frequencies are a reference point for a home pool, not a rule it must follow. A hot tub also needs chlorine and pH tested at least twice a day (CDC).

In short: CDC asks home pool owners to test chlorine and pH at least twice a day and sets no interval for anything else. The MAHC 2024, a public-pool code, fills the gap: alkalinity weekly, calcium hardness and CYA monthly, the saturation index monthly and TDS quarterly.

These figures are copied from the sources listed on this page, as published; they aren't instructions for any one product. Follow the label on the product you use, and your local health code if your pool is public.

Get new tools by email

When we add a tool to Pool Chemical Log, we'll send you one short email. Nothing else.

This chart answers a plain question: how often does each reading need testing? It puts the CDC's advice for home pools beside the schedule in the CDC's Model Aquatic Health Code, a public-pool code, and names the code section behind every interval. Where a source sets no frequency the cell says "Not set", which is different from saying the reading doesn't matter. It is for a home pool owner building a routine, and for anyone who wants to see what a public pool is required to do.

Worked example: a week of testing for a salt pool

Take a 16,000-gallon vinyl pool with a salt chlorine generator and a family that swims most evenings. Reading the chart row by row gives this routine.

  • Every morning and evening: free chlorine and pH, which is the CDC's floor of twice a day. After a pool party the CDC's "more often" applies, so an extra test that evening is in keeping with it.
  • Once a week: total alkalinity. The MAHC 2024, a public-pool code, lists weekly, and alkalinity steadies pH, so it is the first thing to check if pH keeps drifting.
  • Once a month: calcium hardness, CYA, the saturation index and, for a salt pool, the salt level. Hayward's schedule for its own generator also lists salt as a monthly check.
  • Once a quarter: TDS, which in a salt pool starts high because the salt counts toward it.

On Monday the owner adds CYA. The code says to test 24 hours after the addition, so Tuesday's test is the one that shows whether the dose landed, and the monthly test goes back to its usual date.

Two sources, two jobs

The CDC's home-pool page is short on frequency. It says to "Test chlorine concentration and pH at least twice per day, and more often when the pool or hot tub is being used by a number of people", and its guidance page for pool owners repeats the point: check the level "at least twice per day (and more often when the pool is in heavy use)". That is all the CDC sets for a home pool, and the chart's CDC column shows "Not set" everywhere else.

The rest comes from the MAHC 2024, a public-pool code. It is written for public pools, so a home pool is not bound by it. It is a documented reference point, and it is the only public-domain source that sets an interval for every routine reading. Its section 5.7.5 is titled water quality chemical testing frequency, and the last column of the chart gives the subsection for each row.

Why chlorine and pH are tested so often

Chlorine and pH are the two readings the CDC singles out. It says many things lower the chlorine concentration, including sweat, dirt, sunlight and hot tub jets that throw droplets into the air, and pH decides how well the chlorine works. A pool in a public setting with a manual feeder is tested before opening and every 2 hours, and one on an automatic feeder every 4 hours, because with a manual feeder nothing adjusts the dose between tests. A home pool with a salt generator is closer to the automatic case; a home pool dosed by hand is closer to the manual one.

The slower readings

Alkalinity, calcium hardness, CYA, the saturation index and TDS move slowly, which is why their intervals are weeks or months. Each one still has a job. Alkalinity is the buffer behind pH. Calcium hardness decides whether water etches or scales, and the code treats the saturation index as a monthly check on the sum of them: "The SATURATION INDEX shall be checked monthly." CYA gets two extra rules: the code says "CYA shall be tested 24 hours after the addition of CYA to the AQUATIC VENUE", and a pool whose main chlorine is stabilized (trichlor or dichlor) is to be checked weekly, because every dose adds more CYA. The pool LSI calculator turns a month's readings into the index.

The salt row

The MAHC 2024, a public-pool code, requires salt testing in section 5.7.5.11 wherever in-line electrolytic chlorinators are used. The interval is set in the code's own text, so the chart does not put a figure in that cell. Generator makers fill the gap in their manuals: Hayward's schedule puts salt among its monthly checks, and CircuPool asks owners to watch salinity as often as they check other chemistry, with a full water check weekly and at least monthly. After adding salt, the unit's own display needs a day to catch up, so test again then.

How to test, as the CDC puts it

A DPD test kit is the CDC's recommended method for chlorine and pH. Test strips also work, but they are less accurate. Follow the maker's directions in every case. The CDC also warns that a chlorine reading above 10 ppm can bleach the test and show a false low or zero, so a surprising result after shocking is worth retesting.

Keeping the record

A schedule only helps if the results are kept. Log each test in the pool chemistry log, which flags readings that are out of range, and compare the figures with the ideal levels chart or what cyanuric acid does when a number looks wrong. A pool service technician can run the slow tests, such as TDS and the saturation index, if the home kit can't.