Ideal Pool Chemical Levels: Chlorine, pH, Alkalinity, CYA and Hardness
Updated
| Reading | CDC, for home pools | MAHC 2024, a public-pool code | MAHC section |
|---|---|---|---|
| Free chlorine, no CYA in the water | At least 1 ppm | At least 1.0 ppm | 5.7.3.1.1.2.1 |
| Free chlorine, with CYA (stabilizer) | At least 2 ppm | At least 2.0 ppm | 5.7.3.1.1.2.2 |
| Free chlorine, upper limit | Not set | No higher than the product label allows | 5.7.3.1.1.5 |
| pH | 7.0–7.8 | 7.0–7.8 | 5.7.3.4.1 |
| Total alkalinity | Not set | 60–180 ppm | 5.7.4.4.1 |
| Combined chlorine (chloramines) | Not set | Act to lower it above 0.4 ppm | 5.7.4.4.2 |
| Calcium hardness | Not set | No more than 2,500 ppm | 5.7.4.4.3 |
| Cyanuric acid (CYA) | Not set for pools | At or below 90 ppm; closed at 300 ppm or higher | 5.7.3.1.3.2 and 5.7.3.1.3.3 |
| Bromine, if used instead of chlorine | Not set | At least 3.0 ppm, no more than 8.0 ppm | 5.7.3.1.2.2 and 5.7.3.1.2.3 |
The MAHC is written for public pools. Its Annex, guidance for public pools, adds a preferred calcium hardness of 200–400 ppm for masonry and 80–200 ppm for vinyl or fiberglass (5.7.4.6).
In short: A home pool should hold pH 7.0–7.8 and at least 1 ppm free chlorine, or at least 2 ppm when it is stabilized with CYA (CDC). The MAHC 2024, a public-pool code, adds the rest: total alkalinity 60–180 ppm, combined chlorine acted on above 0.4 ppm, calcium hardness no more than 2,500 ppm and CYA at or below 90 ppm.
These figures are copied from the sources listed on this page, as published; they aren't instructions for any one product. Follow the label on the product you use, and your local health code if your pool is public.
Get new tools by email
When we add a tool to Pool Chemical Log, we'll send you one short email. Nothing else.
This chart puts the target for every routine pool reading on one screen, with the figure a home pool owner is given by the CDC in one column and, in the next, the figure in the Model Aquatic Health Code (MAHC), a public-pool code. The last column names the section of that code each number comes from, so any line can be checked against the original. Use it to read a test result at a glance; use the pool chemical calculator when a reading is out and you need the dose that moves it.
Two sources, two jobs
The CDC's page for home pool and hot tub owners sets only two things: free chlorine and pH. It asks for a pH of 7.0 to 7.8 and at least 1 ppm of free chlorine in a pool (3 ppm in a hot tub). When the water holds stabilizer, the pool minimum doubles to 2 ppm, and the same page advises against stabilizer in a hot tub at all.
Everything else in the chart comes from the MAHC 2024 (5th edition), a public-pool code. It is written for public pools, so on a backyard pool its figures are a well-documented reference point, not a rule you are bound by. They are included because no public-domain home-pool source sets a range for alkalinity, calcium hardness or CYA at all, and a blank cell helps nobody.
Worked example: reading one test
Say a vinyl pool stabilized with CYA tests at 1.5 ppm free chlorine, pH 7.9, 90 ppm total alkalinity, 0.6 ppm combined chlorine, 150 ppm calcium hardness and 70 ppm CYA. Against the chart:
- Free chlorine is low. With CYA in the water, both columns ask for at least 2 ppm, so 1.5 ppm falls short.
- pH is high. 7.9 sits just over the 7.0–7.8 that both sources share.
- Combined chlorine is high. The MAHC 2024, a public-pool code, asks the operator to act once it passes 0.4 ppm, and 0.6 ppm has.
- Alkalinity, hardness and CYA are inside their public-pool code limits. Hardness also sits inside the 80–200 ppm that the MAHC Annex, guidance for public pools, prefers for a vinyl or fiberglass pool.
The order of the fixes matters as much as the list. Alkalinity comes before pH, and the guide to lowering pH walks through why. A combined chlorine reading over the line is usually answered with a shock, which the pool shock calculator sizes.
Free chlorine and CYA go together
The two free chlorine minimums are not a choice between two numbers. Stabilizer holds chlorine in reserve, so the same reading does less work in a stabilized pool, and the higher minimum allows for that. PHTA's cyanuric acid bulletin, industry guidance, puts its own ideal range this way: "When used, the ideal range for cyanuric acid is 30 – 50". The MAHC 2024, a public-pool code, caps CYA at 90 ppm, and orders a pool closed at 300 ppm or more until it is fixed. What cyanuric acid does explains the ratio between the two readings.
The rows with no home-pool figure
"Not set" in the CDC column means exactly that: the home-pool page doesn't give a number for that reading. It is not a sign that the reading doesn't matter. Total alkalinity steadies pH, calcium hardness decides whether plaster etches or scales, and combined chlorine is the irritant behind the sharp smell that swimmers tend to blame on too much chlorine. On the upper end of free chlorine, the MAHC 2024, a public-pool code, defers to the product: maximum levels "shall not exceed limits specified on the product label."
When to get help
A chart can tell you a reading is out; it can't tell you why. If a reading keeps drifting back out of range after a correct dose, if the water is cloudy or green at levels the chart calls fine, or if equipment is involved, a pool service technician with a full water analysis is worth the visit. Keep a dated record of each test in the pool chemistry log, which flags readings against these same ranges, so whoever looks at the pool can see the trend rather than one result.