How Much Shock for a 30,000-Gallon Pool?
Updated
On this page
Calcium hypochlorite shock at 70% available chlorine, the minimum on HTH Granular 73's EPA label, raises free chlorine by 10 ppm in a 30,000-gallon pool with 57.2 oz (3.58 lb), and by 5 ppm with 28.6 oz (1.79 lb). That 5 to 10 ppm band is what the label means by a shock. When combined chlorine is the reason for shocking, the dose is set by 10 times that reading instead, and the second table covers it.
Shock doses for a 30,000-gallon pool
| Raise free chlorine by | Cal hypo (70%) | Or liquid chlorine (12.5%) |
|---|---|---|
| 1 ppm | 5.7 oz | 26.9 fl oz |
| 3 ppm | 17.2 oz (1.07 lb) | 80.7 fl oz |
| 5 ppm | 28.6 oz (1.79 lb) | 134.5 fl oz (1.05 gal) |
| 8 ppm | 45.8 oz (2.86 lb) | 215.1 fl oz (1.68 gal) |
| 10 ppm | 57.2 oz (3.58 lb) | 268.9 fl oz (2.10 gal) |
Cal hypo sold as 65% or 73% needs a little more or a little less than the 70% column, and the pool shock calculator takes the strength on your own bag. The liquid chlorine column is the same 12.5% jug as the liquid chlorine page for this size.
Shocking to clear combined chlorine
Combined chlorine is total chlorine minus free chlorine: chlorine already tied up with sweat, urine and other waste, and the cause of the "chlorine smell". The MAHC 2024, a public-pool code, defines breakpoint chlorination in its glossary and says the free chlorine to add "is approximately 10 times the … amount of combined chlorine in the water."
| Combined chlorine | Free chlorine to add | Cal hypo (70%) |
|---|---|---|
| 0.2 ppm | 2 ppm | 11.4 oz |
| 0.3 ppm | 3 ppm | 17.2 oz (1.07 lb) |
| 0.5 ppm | 5 ppm | 28.6 oz (1.79 lb) |
| 1.0 ppm | 10 ppm | 57.2 oz (3.58 lb) |
What the bag's label says for 30,000 gallons
HTH Granular 73's label (EPA Reg. No. 1258-1239) directs "9-18 ounces" per 10,000 gallons "to provide 5 to 10 ppm available chlorine", which for 30,000 gallons is 27.0 to 54.0 oz. Its own chart only runs from 8,000 to 17,500 gallons, so for 30,000 gallons the per-10,000-gallon figure is the one to scale. It sets the routine at "Every 7 days, or as necessary to prevent pool problems".
What a shock adds besides chlorine
Cal hypo leaves calcium behind. From the molar masses, every 1 ppm of free chlorine it adds raises calcium hardness by about 0.71 ppm (PHTA rounds it to 0.8), so a 10 ppm shock adds about 7.1 ppm. Weekly shocks in a pool on hard fill water add up over a season; the pool LSI calculator shows when the water starts to lean toward scale, and liquid chlorine, which adds no calcium, is the usual switch.
Worked example
A 30,000-gallon pool reads 0.8 ppm free chlorine and 0.4 ppm combined after a heat wave. The owner aims for 10 ppm. The gap to the target is 9.2 ppm, more than 10 times the 0.4 ppm of combined chlorine, so the shock is 9.2 ppm: 52.6 oz (3.29 lb) of 70% cal hypo, or 247.4 fl oz (1.93 gal) of 12.5% liquid chlorine. Shocking at dusk, as the label directs, keeps the sun from burning off part of the dose before it works.
Is your pool really 30,000 gallons?
Every amount on this page scales with the water, so a pool 20% bigger than you think needs 20% more of everything. Here are two pools that hold close to 30,000 gallons, worked with the same formulas as the pool volume calculator:
| Pool | Gallons |
|---|---|
| A round pool 33 ft across, 4.5 ft average depth | 28,791 |
| A rectangle 20 × 40 ft, 5 ft average depth | 29,922 |
If yours is another shape, or you only know its size roughly, measure it and run the calculator first. An overestimate here means an overdose, and a longer wait before anyone can swim.
The same shock in other pool sizes
| Pool size | +5 ppm | +10 ppm | +10 ppm, liquid |
|---|---|---|---|
| 5,000 gal | 4.8 oz | 9.5 oz | 44.8 fl oz |
| 10,000 gal | 9.5 oz | 19.1 oz (1.19 lb) | 89.6 fl oz |
| 15,000 gal | 14.3 oz | 28.6 oz (1.79 lb) | 134.5 fl oz (1.05 gal) |
| 20,000 gal | 19.1 oz (1.19 lb) | 38.2 oz (2.38 lb) | 179.3 fl oz (1.40 gal) |
| 25,000 gal | 23.8 oz (1.49 lb) | 47.7 oz (2.98 lb) | 224.1 fl oz (1.75 gal) |
| 30,000 gal (this page) | 28.6 oz (1.79 lb) | 57.2 oz (3.58 lb) | 268.9 fl oz (2.10 gal) |
Adding it, and when to swim again
The label's directions are to "Add the recommended dosage of this product during evening hours while the filter pump is running" and to "broadcast the product evenly over a wide area in the deepest part of the pool." It adds: "If any granules settle to the bottom of the pool, use brush to disperse." Swimming waits for the chlorine to fall: "Re-entry into treated pools is prohibited above 4 ppm due to risk of bodily harm." Cal hypo must never meet trichlor or any other chemical outside the pool; never mix these pool chemicals explains why. For the same 30,000-gallon pool, see the amounts of liquid chlorine, salt, baking soda and stabilizer, or every chemical and size.
Sources (6)
- EPA Reg. No. 1258-1239, HTH Granular 73 calcium hypochlorite label (2025) www3.epa.gov
- CDC, Model Aquatic Health Code, 2024 (5th edition): Code, a public-pool code cdc.gov
- PHTA, Pool & Spa Management (2021), Appendix B: Water Chemistry Guidelines & Worksheets phta.org
- EPA Reg. No. 82357-1, 12.5% sodium hypochlorite label (2020) www3.epa.gov
- HASA, 12.5% Sodium Hypochlorite SDS (2026) hasa.com
- Indiana Department of Health, Adjusting Chemical Levels in a Swimming Pool in.gov
Get an email when the Pool Chemistry Log & Dosing Chart Pack goes on sale
Leave your email and we'll send one message when the Pool Chemistry Log & Dosing Chart Pack is on sale, and occasional updates about it.