Skip to content
Pool Chemical Log

How Much Liquid Chlorine for a 10,000-Gallon Pool?

Updated

On this page

A jug of 12.5% liquid chlorine, which is 11.9% available chlorine by weight, raises free chlorine by 1 ppm in a 10,000-gallon pool with 9.0 fl oz. An everyday top-up of 2 ppm takes 17.9 fl oz, and a 10 ppm shock takes 89.6 fl oz. A 10% jug needs more for the same rise. The tables below give both strengths, what the jug's own EPA label directs for a pool this size, and how high to take free chlorine.

Liquid chlorine doses for a 10,000-gallon pool

Raise free chlorine by12.5% jug (11.9% available chlorine)10% jug
1 ppm9.0 fl oz11.6 fl oz
2 ppm17.9 fl oz23.3 fl oz
3 ppm26.9 fl oz34.9 fl oz
5 ppm44.8 fl oz58.2 fl oz
10 ppm89.6 fl oz116.4 fl oz

The 12.5% column uses the strength printed on EPA Reg. No. 82357-1's label, 11.9% available chlorine, at the specific gravity of 1.2 in HASA's safety data sheet for its 12.5% product. The 10% column converts the 10% sodium hypochlorite on EPA Reg. No. 1258-1094's label to available chlorine (× 70.90 ÷ 74.44) at the 1.155 g/mL in HASA's sheet for its 10% product. A jug labelled with another strength, or by "trade percent", needs the pool shock calculator, which takes the number from your own label.

What the jug's label says for 10,000 gallons

The 82357-1 label gives its directions per 10,000 gallons. For a new pool or a spring start-up it says to "superchlorinate with 52 to 104 fl. oz. of product for each 10,000 gallons of water to yield 5 to 10 ppm available chlorine by weight", which for 10,000 gallons is 52.0 to 104.0 fl oz. For upkeep it gives "11 fl. oz. of this product for each 10,000 gallons", or 11.0 fl oz here, aiming at 1.0 to 1.5 ppm in a stabilized pool.

The label's start-up figure runs about 16% above the arithmetic in the table. Part of the reason is printed on the same label: "This product degrades with age and exposure to sunlight and heat." A jug that has spent a summer in a hot shed is weaker than the number on it, so treat the table as the least a fresh jug needs, and let a test decide whether to add more.

How high to take free chlorine

CDC's guidance for home pools is "a chlorine concentration of at least 1 ppm in pools" without stabilizer, and at least 2 ppm in a pool with stabilizer (cyanuric acid) in it. The top of the everyday range comes from the label: "Re-entry into treated swimming pools is prohibited above levels of 4 ppm of chlorine due to risk of bodily harm." So a top-up in a stabilized 10,000-gallon pool works between 2 and 4 ppm, and a shock above 4 ppm means staying out until it falls back. To size a shock from a combined chlorine reading, use the shock page for this size.

Worked example

A 10,000-gallon pool was refilled after a repair and has no stabilizer yet. It reads 1.0 ppm, CDC's minimum for an unstabilized pool, and the owner wants 3 ppm before the weekend. That is a 2.0 ppm rise, so from the table's arithmetic it takes 17.9 fl oz of a fresh 12.5% jug, or 23.3 fl oz of a 10% one. Without stabilizer, sunlight takes chlorine out fast, so the stabilizer page for this size is the next job.

Is your pool really 10,000 gallons?

Every amount on this page scales with the water, so a pool 20% bigger than you think needs 20% more of everything. Here are two pools that hold close to 10,000 gallons, worked with the same formulas as the pool volume calculator:

PoolGallons
A round above-ground pool 21 ft across, 4 ft average depth10,364
A rectangle 12 × 24 ft, 4.5 ft average depth9,695

If yours is another shape, or you only know its size roughly, measure it and run the calculator first. The pool chemical calculator then works out chlorine along with the rest of a test.

The same doses in other pool sizes

Pool size+1 ppm+3 ppm+10 ppm
5,000 gal4.5 fl oz13.4 fl oz44.8 fl oz
10,000 gal (this page)9.0 fl oz26.9 fl oz89.6 fl oz
15,000 gal13.4 fl oz40.3 fl oz134.5 fl oz (1.05 gal)
20,000 gal17.9 fl oz53.8 fl oz179.3 fl oz (1.40 gal)
25,000 gal22.4 fl oz67.2 fl oz224.1 fl oz (1.75 gal)
30,000 gal26.9 fl oz80.7 fl oz268.9 fl oz (2.10 gal)

Pouring it safely

Pour it slowly into the deep end or in front of a return with the pump running, never into the skimmer: Indiana's health department says "Do not add chemicals to vacuum filter tanks, skimmers or gutters." Its handling list also says "Never mix any chemicals together." Keep liquid chlorine away from acid and from other chlorine products outside the pool; never mix these pool chemicals sets out which pairs react and why. For the same 10,000-gallon pool, see the amounts of shock, salt, baking soda and stabilizer, or every chemical and size.

Sources (6)

Get an email when the Pool Chemistry Log & Dosing Chart Pack goes on sale

Leave your email and we'll send one message when the Pool Chemistry Log & Dosing Chart Pack is on sale, and occasional updates about it.